Back Panels

Select your options below

Our range of back panels slot into shelving uprights to join them together and create the back of a shop shelving unit.

    • 1.69 £
    • 2.79 £
    • 2.9 £
    • 3.2 £
    • 2.06 £
    • 3.2 £
    • 3.8 £
    • 4.01 £
    • 1.86 £
    • 2.92 £
    • 3.96 £
    • 4.68 £
    • 2.57 £
    • 4.55 £
    • 4.68 £
    • 6.19 £
    • 1.69 £
    • 2.79 £
    • 2.9 £
    • 3.2 £
    • 2.06 £
    • 3.2 £
    • 3.8 £
    • 4.01 £
    • 1.86 £
    • 2.92 £
    • 3.96 £
    • 4.68 £
    • 2.57 £
    • 4.55 £
    • 4.68 £
    • 6.19 £

Description

Our range of back panels slot into shelving uprights to join them together and create the back of a shop shelving unit.

The height of back panels required for each shelving bay is 110 mm less than the upright height, for example, a 2110 mm bay uses a total of 2000 mm height of back panels, most effectively achieved by using 5 x 400 mm back panels.

Plain back shelving panels can be combined with perforated (pegboard) back panels or Slatwall back panels on the same shelving unit.

Gondola shelving and promo shelving units where both sides are visible require back panels on both the front and the rear.

Our back panels have a tongue and groove edge which increases the rigidity and strength of the shelving bay and are supplied in either cream or silver colours.

YSF shop shelving back panels can be combined with other 50 pitch system back panels if put at the bottom and look identical when in place.

Available in the following lengths:

665mm

800mm

1000mm

1250mm

Available in the following heights:

100mm

200mm

300mm

400mm